Basic Principles of Air Distribution
Price: $ 58.00 (USD)
Add to Cart
You will receive 2.0 credits (CE) upon completion of this course.
Have a question about this course? Contact a representative.
Course Description
Overview
Basic principles of air distribution as related to air device selection is fundamental knowledge that an HVAC engineer or designer should understand before selecting air devices. ASHRAE standards and codes have adopted criterion that suggests that air devices are an integral part of good ventilation effectiveness in buildings.
In this course the student will learn some of the basic principles of air distribution as related to grilles, diffusers and air outlet selections and applications.
The student is expected to read and review the material contained in Titus Product Catalog Engineering Guidelines section.
The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain PDH credits.
Specific Knowledge or Skill Attained
This course teaches the following specific knowledge and skills:
State Board Acceptance
This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.
*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.
**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.
Please Note: Continuing Education credits for this course are awarded as PDH (Professional Development Hour Credits).
Back to Top
Basic principles of air distribution as related to air device selection is fundamental knowledge that an HVAC engineer or designer should understand before selecting air devices. ASHRAE standards and codes have adopted criterion that suggests that air devices are an integral part of good ventilation effectiveness in buildings.
In this course the student will learn some of the basic principles of air distribution as related to grilles, diffusers and air outlet selections and applications.
The student is expected to read and review the material contained in Titus Product Catalog Engineering Guidelines section.
The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain PDH credits.
Specific Knowledge or Skill Attained
This course teaches the following specific knowledge and skills:
· The goal of an air diffusion system: maintaining comfort
· Comfort functional factors
· Outlet location and selection methods
· Isothermal air jet analysis
State Board Acceptance
This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.
*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.
**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.
Please Note: Continuing Education credits for this course are awarded as PDH (Professional Development Hour Credits).
More Information
| Language | English |
| Course Length | 2.00 hours |
| Duration of Access | 365 Days |
| Continuing Education Credits | 2.0 |
| Instructor | Self-Study |
| Vendor | PDHengineer (Read more about PDHengineer accreditation.) |
| Course Certification | Certificate of Completion |
Price: $ 58.00 (USD)
Add to Cart